Vertex Puratek 100 GPD RO/DI System - Manual Flush

Puratek 100 GPD RO/DI Filter

 

Procuring pure water is the very baseline of success for the modern aquarist. Vertex Aquaristik rises to this challenge with the conception of the Puratek RO/DI water filters. Through sound component selection and optimization of contaminant extraction, Puratek RODI units minimize water consumption and media replacement.

 

Puratek RO/DI units all feature integrated manual Back-Flush valves to maximize the life and output of the membrane cartridge. Performing routine manual system Back-Flushes, preserves the longevity of the membrane and increases efficiency. The unit is further furnished with an easily viewed oil-filled pressure gauge and an automatic shut-off valve which halts all water transit during instances of backpressure. By closely monitoring the water input, Puratek Deluxe RO/DI systems are amongst the most eco-friendly units, producing pure water with reduced waste. Under standard operating parameters, Puratek Deluxe RO/DI systems typically achieve a product/waste water ratio of ~1:2 ½. . A set of clear, easy-to- view canisters are visible indicators of cartridge life. Finally, standardized fittings and cartridges ease the task of routine maintenance.

 

Features:

• Produces up to 100 US-Gallons/day (Approximately 375LPD), Tested at 60 PSI & 50˚F

• Oil-filled pressure gauge

• ~1:2 ½ Pure/Waste water ratio (source water temperature and Pressure dependent)

• Easy to view precision Oil-filled pressure gauge

• Manual Back-Flush system prevents TDS creep

• Includes canister wrench and installation adaptors and fittings

 

Technical Data:

• Pentair-100 GPD membrane

• 5 µ polypropylene Pre-filter sediment cartridge

• 5 µ carbon block cartridge

• High capacity DI-resin cartridge

• Dimensions: ~ 380 * 170 * 380mm / ~ 15” * 6.7” * 15” (Width/ Depth/ Height)