Ultralife Products ‘The Tank Boss‘ Advanced ATO Auto Top OFF

The Tank Boss is an Exciting NEW Auto Top Off (ATO) with a number of great features built in. The Tank Boss is actually a Highly Advanced Auto Top Off, Level Control and Leak Detection in one unit!

Integrated with a digital timer, triple redundant safeties and an audible alarm it is the Ultimate Tank Control Unit.

With six reed float switches, you are able to keep track of all your levels and even alarms you when needed.

In low water scenarios, The Tank Boss has safeties to shut off your pumps and heaters, and alarms to make you aware of it. It also incorporates an overflow safety for either your tank, sump or skimmer.

Another great feature is the Leak Detection Sensor with alarm to let you know if the aquarium or filters starts to leak for whatever reason. There are additional level sensors to add more redundancy.

The Tank Boss runs on safe low voltage 12VDC fused protected circuitry and comes with a 3 ft. power cord and cabling, but there are 6 ft. extensions available in case you need extra length to route your sensor or float switches.

FEATURES:

~Adjustable Automatic Top Off
     (WITH Integrated Digital Timer & Triple Redundant Safeties  & Audible Alarm)
 ~10 Amp Low Water Pump/Heater Safety
(with Audible Alarm)
~Main Pump/Feed Switch
~Tank or Skimmer Overflow Safety
(with Audible Alarm)
~Leak Detection Sensor
(with Audible Alarm)
 ~Quick Connect Level Sensors
(36″ Cabling Standard.  72″ Extensions Available)
~Bright LED Indicator Lights
~Fuse Protected Circuitry
~Safe Low Voltage 12 VDC
~Made in USA
What’s in the Box  
~ ‘The Tank Boss’ Main Unit
~ 3 FT Removable Power Cord
~ 6 Reed Float Switches with 36″ cabling
~ Leak Sensor with 72″ cabling
~ Color Coded Connections
~ Assorted Mounting Hardware & Brackets
OPTIONAL ACCESSORIES:
~ 72″ Cabling Extensions

(Back of The Tank Boss ATO)

Manufacturer Info
Ultralife
Ultralife Reef Products is a manufacturer and distributor of equipment and supplies for freshwater, saltwater and reef aquariums. Many of their products, you will recognize from advertisements in national magazines and on the shelves in your local pet shop. However, they are constantly upgrading and developing new products to meet the needs of the aquarium industry.

Warranty
Manufacturer`s Waranty: 1 year from date of purchase.

OPERATING INSTRUCTIONS FOR #FS10A 'FLOAT SWITCH'


THE FLOAT SWITCH WILL HANDLE A MAXIMUM LOAD OF 10 AMPS, AND CAN
OPERATE IN A 'LOW' WATER OR 'HIGH' WATER APPLICATION.

1. THE FLOAT SWITCH COMES FACTORY-READY FOR 'LOW' WATER
APPLICATION. IF YOU WILL BE USING THE FLOAT SWITCH FOR 'HIGH' WATER
APPLICATION, REMOVE PLASTIC RETAINING CLIP ON END OF SHAFT, REMOVE
THE BARREL FLOAT, TURN BARREL FLOAT UPSIDE DOWN AND REINSTALL
BARREL AND CLIP. THE FLOAT SWITCH IS NOW READY FOR 'HIGH' WATER
USAGE.

2. MOUNT FLOAT ASSEMBLY INTO SUMP OR WATER BY MEANS OF THE INCLUDED
SUCTION CUP ASSEMBLY. BE SURE NOT TO ALLOW THE WIRES THAT COME OUT
OF THE TOP OF THE SHAFT OR ANY OF THE ELECTRICAL WIRES OR THE BLACK
JUNCTION BOX TO BE SUBMERSED INTO THE WATER. THESE PARTS ARE NOT
WATER-SAFE.

3. THE FLOAT ASSEMBLY CAN BE RAISED OR LOWERED TO ACHIEVE DESIRED
'TURN-ON' OR 'TURN-OFF' POINT. SIMPLY SLIDE FLOAT BODY UP OR DOWN
WITHOUT MOVING SUCTION CUP.

4. MOUNT BLACK JUNCTION BOX ABOVE WATER LEVEL WHERE IT IS NOT
POSSIBLE TO FALL INTO WATER.

5. PLUG MALE CORD INTO G.F.C.I. OUTLET, PLUG WATER PUMP INTO FEMALE
CORD. YOUR FLOAT SWITCH IS NOW OPERATIONAL, HOWEVER, FINE TUNING
MAY BE NECESSARY. THIS CAN BE DONE BY REPEATING STEP #3 UNTIL
DESIRED OPERATION IS ACHIEVED.