Royal Exclusiv Red Dragon 3 100w - HIGH PRESSURE Pump - 10v connection
Be the first to review this product.

Item #: RE-RD3-100W-HP
Shipping: Eligible for Free Shipping Program
Availability: Out Of Stock


Red Dragon 3 Speedy pump 100 Watt / 9,0m³ / 2.400 gph  with AKB anti-lime-bypass
Technical data  Red Dragon 3 Speedy pump 100 Watt  2.400 gph (9,0 m³):
100 Watt/h // max. 19 feet (6 mtr.) pressure height
speed adjustable Brushless DC pump
Watt-Display in 2 Watt-steps adjustable
intake side Ø 1.5′′ (50 mm) - pressure side Ø 1′′  (32 mm)
operating voltage: 110 Volt 60 Hz 
Protection class pump: IP 68  control unit: IP 66   
Weight pump: 3,4 kg 
Weight controller: 1,1 kg
Height of intake side: center 2.76′′ (70 mm) 
Dimension pump: 
5.12" wide / 9.25" length / ~ 7.48" height
130 mm wide / 235 mm length / ~ 190 mm height
Dimension control unit: 
5.51" wide / 7.48" length / ~ 2.76" height
140 mm breit / 190 mm length / ~ 70 mm height
Saltwater resistant M6 grade 2 titanium screws
Saltwater resistant parabolic rubber feet for acoustic decoupling
Extreme low noise brushless dc-delivery pump with grouted power electronics
High efficient technology "Made in Germany"
Inlet and Outlet complete with DIN connection, compact dimensions
High performance ceramics bearings and hollow shaft for bypass purging in the rotor housing
Only saltwater resistant pump with titanium rotor, titanium stator and shrivelled bearings
Easy usage and maintenance. Low risk of calcification due to polished titanium parts and compulsory purgeing
Heavy and massive craftsmanship against vibrations and oscillation
CE conformity, developed and built according to VDE guidelines
Use as a circulation pump is prepared in each pump!
Prepared for connection to an aquarium computer (E.g. GHL) via a 0-10V interface.
An additional controller for the connection to the computer (incl. all connection cables and main adaptor) could be order here.
Tested so far folowing these computers: 
GHL ProfiLux and from Neptune Systems the Apex Aqua Controller.
The pulsing is in 5s intervals possible.
Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function. 
If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. 1V starts the pump at the lowest level (15W) and run. At an increase of 0,5V will increase the level, also. So 1V = 15W 1,5V = 20W 2V = 25W….. 7,5V = 100W. 
At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.
Product Reviews
Post Your Review

You must be logged in to post a product review.