Logo
 
Red Dragon 3 Speedy 150 Watt ~ 10V connection
Be the first to review this product.
 
$1,153.95

Item #: RE-RD3-150W-10V
Shipping: Eligible for Free Shipping Program
Availability: Out Of Stock

THIS ITEM IS ON BACKORDER


RD3 Speedy pump 150 Watt / 18,0m³ 
with AKB anti-lime-bypass and 10V connection
 
 
Technical data  RD3 Speedy pump 150 Watt 18,0 m³:
Red Dragon® 3 Speedy pump 150 Watt / 18,0m³ Product no.: 605 
Technical data Red Dragon® 3 Speedy pump 150 Watt / 18,0m³:
Performance: 18,100 liter / h
0 Feet: 4,755gph at 150w 
6 Feet: 2,800gph at 150w
Cable length: 0,8 meter (plug controller)
3,8 meter (controller to pump)
pump and controller with a removeable Hirschmann-plug-connection
Pressure side: Ø 40 mm Intake side: Ø 50 mm
Wattage: adjustable max. 150 Watt (min. 20W, in 2 W steps)
Pressure height: max. 5,75 meter
Material/color: PVC black/red/grey with screw connection
Operating voltage: also in 110V/60Hz 
Noise level: 39 - 45 db at full speed (measured in 1 m distance - operation external)
Protection class: IP 68 (submersible pump) IP 66 (controller)
Weight: 4,7 kg
Height of intake side: center 70 mm
Dimension pump: ~ 130 mm wide / 290 mm length / 210 mm height
Dimension controller:~ 190 mm wide / 168 mm length (250 mm with connection cable) / ~ 84 mm 
Weight controller: 1,2kg
 
 
Saltwater resistant M6 grade 2 titanium screws
Saltwater resistant parabolic rubber feet for acoustic decoupling
Extreme low noise brushless dc-delivery pump with grouted power electronics
High efficient technology "Made in Germany"
Inlet and Outlet complete with DIN connection, compact dimensions
High performance ceramics bearings and hollow shaft for bypass purging in the rotor housing
Only saltwater resistant pump with titanium rotor, titanium stator and shrivelled bearings
Easy usage and maintenance. Low risk of calcification due to polished titanium parts and compulsory purgeing
Heavy and massive craftsmanship against vibrations and oscillation
CE conformity, developed and built according to VDE guidelines
 
Extensive function integrated in the controller:
 
1. Food timer
By selecting the menu entry, the pump is reduced to minimum output for a pre-defined period of 1-30 minutes or switched off completely.
 
2. Manual
This function enables manual selection of the pump output. The value can be set in increments of 2W (10W). By holding the UP or DOWN key, the highest or lowest possible value is activated (150W/20W).
 
3. Interval
This function enables changing the pump output in time intervals.
 
4. Remote 10V
This function activates control via the 10V input.
 
5. Remote LAN
This function activates the control via the future LAN adapter.
 
 
Change functions:
 
6. Changing food timer
By selecting this change function, the time of the food timer can be pre-set at a range of one minute to 30 minutes (UP/DOWN arrow keys).
 
7. Changing interval
By selecting this change function, you can enter the interval time.
 
8. Change clock settings
By selecting this change function, you can set the clock.
 
9. Change language
By selecting this change function, you can set the menu language. (german/english).
 
The control/connection of Aquarium computer possible!
Prepared for connection to an aquarium computer (E.g. GHL) via a 0-10V interface.
No additional controller needed.
 
Connection cable here available ! 
 
Tested so far folowing these computers: 
GHL ProfiLux 3.1 and from Neptune Systems the Apex Aqua Controller.
 
Compatible with following brands:
Neptune Systems, GHL, and Reef Ai
 
Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function. 
 
If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. From ~ 0,8V starts the pump at the lowest level (20W) and run. At an increase of 0,5V will increase the level, also. So 1V = 20W ….. 9V = 150W.
 
At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.
Product Reviews
 
Post Your Review

You must be logged in to post a product review.