Finnex Deluxe 500 Watt Heater and 820M Controller Combo

HC-820M Series Overview

 

1000 Watt Max Output Load with Dual Relay Protection

Out of Water Sensor Protection Audio Alert

1/10th Degree Temperature Calibration

3 Digit Digital Display & Control

Over Heating Audio Alert

Temperature Saving Memory Protection

1.5°F High Precision Accuracy

Temperature Steady Low Variance Technology

 

The HC-820M controller uses an advanced digital processor that monitors and controls the

water temperature in your aquarium. The heating controller receives temperature data from

the remote sensor in the aquarium. The remote sensor contains no bi-metallic contacts to

arc, corrode or wear out. This allows the HC-820M to have precise control, keeping the water

temperature stable while avoiding wide temperature swings common with low-quality aquar-

ium controllers. The controller displays the current temperature, allowing you to easily make

temperature adjustments on the front panel. Temperature can be adjusted by a tenth of a

degree

The remote sensor also functions as an automatic power cut-off switch. If the water level

drops too low and exposes the temperature sensor to the air, power to the heater tube is

turned off. This prevents over-heating of the aquarium, saving your prized aquarium life from

harm or other hazards.

Maintenance: Secure the out-of-water sensor directly beneath the sensor cord clip,

without any cord slack, and above the heating element at all times. Clean and confirm

the out-of-water sensor is functioning properly every 30 days. Do not use heater if the

out-of-water sensor is inoperative. Refer to the instruction manual for proper maintenance and care

 

The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from saltwater damage.  Virtually unbreakable, especially in comparison with the standard glass aquarium, these tube are built to last.  The ultra heating titanium further provides a stable temperature environment for your aquarium lives and eliminates temperature swings that put stress on the aquarist's live stock. This titanium heaters are suited for both use in fresh and salt water aquarium. Will work well with other controllers accepting 3 prong heating elements. The titanium heating element is also wrapped with a protective heater guard to prevent one's aquatic inhabitants as well as surrounding equipment.  The new TH-S Deluxe Titanium Series also includes suction cups to allow users to secure the titanium element in preferred locations.  

 

 

Model	Wattage	Amp	Tank Rating	Cord Length	Heating Tube Length
300S	300	2.7	40-80G	74"	10"
500S	500	4.5	70-130G	73.5"	14"
800S	800	9.0	140-265G	73"	16.5"

 

 

Please Note: Additional heating units may be required and discouraged from using in extraordinary setups (where warranty may be void) not limited to:  Applications outside of standard aquarium use, basement setups, garage setups, ponds, outdoor use, greenhouses, extreme temperature conditions, etc.

 

 

HC-820M Series Overview

 

1000 Watt Max Output Load with Dual Relay Protection

Out of Water Sensor Protection Audio Alert

1/10th Degree Temperature Calibration

3 Digit Digital Display & Control

Over Heating Audio Alert

Temperature Saving Memory Protection

1.5°F High Precision Accuracy

Temperature Steady Low Variance Technology

 

The HC-820M controller uses an advanced digital processor that monitors and controls the

water temperature in your aquarium. The heating controller receives temperature data from

the remote sensor in the aquarium. The remote sensor contains no bi-metallic contacts to

arc, corrode or wear out. This allows the HC-820M to have precise control, keeping the water

temperature stable while avoiding wide temperature swings common with low-quality aquar-

ium controllers. The controller displays the current temperature, allowing you to easily make

temperature adjustments on the front panel. Temperature can be adjusted by a tenth of a

degree

The remote sensor also functions as an automatic power cut-off switch. If the water level

drops too low and exposes the temperature sensor to the air, power to the heater tube is

turned off. This prevents over-heating of the aquarium, saving your prized aquarium life from

harm or other hazards.

Maintenance: Secure the out-of-water sensor directly beneath the sensor cord clip,

without any cord slack, and above the heating element at all times. Clean and confirm

the out-of-water sensor is functioning properly every 30 days. Do not use heater if the

out-of-water sensor is inoperative. Refer to the instruction manual for proper maintenance and care

 

The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from saltwater damage.  Virtually unbreakable, especially in comparison with the standard glass aquarium, these tube are built to last.  The ultra heating titanium further provides a stable temperature environment for your aquarium lives and eliminates temperature swings that put stress on the aquarist's live stock. This titanium heaters are suited for both use in fresh and salt water aquarium. Will work well with other controllers accepting 3 prong heating elements. The titanium heating element is also wrapped with a protective heater guard to prevent one's aquatic inhabitants as well as surrounding equipment.  The new TH-S Deluxe Titanium Series also includes suction cups to allow users to secure the titanium element in preferred locations.  

 

 

Model	Wattage	Amp	Tank Rating	Cord Length	Heating Tube Length
300S	300	2.7	40-80G	74"	10"
500S	500	4.5	70-130G	73.5"	14"
800S	800	9.0	140-265G	73"	16.5"

 

 

Please Note: Additional heating units may be required and discouraged from using in extraordinary setups (where warranty may be void) not limited to:  Applications outside of standard aquarium use, basement setups, garage setups, ponds, outdoor use, greenhouses, extreme temperature conditions, etc.