GHL Measurement cell

The measurement cell can obtain up to 4 sensors for measurement records.

The sensors can be inserted watertight into the water cycle with the help of stopper screwings.

The construction of the measurement chamber provides an optimal circulation as well as a self-purification effect on the sensors.

This can result in a longer lifetime of the sensors with at the same time less maintenance requirements.

The measurement cell has to be integrated in the return flow (after the filter). In case of a reduction of pressure or current speed you have to consider using a bypass.

The positioning of the measurement cell must be in a way that no pressure can build up within the cell, since this can lead to a destruction of the sensors.

In order to insert a sensor, you have to release the corresponding screw nut a bit. The sensor is then inserted, after wards you have to tighten the nut again.

Not used sensor holes can be closed with the delivered round sticks.


Technical data:
Diametre: 110 mm
Input/ Output: PVC, 20 mm
Sensor diametre: 12 mm