(Our Local Time: 6:50:28 pm )
H2Ocean Pro+ Salt - 6.6 KG Bucket
NEW HIGH MAGNESIUM SALT
A new premium salt manufactured by a solar evaporative process, which produces a totally natural base salt where all of the main and trace elements are in complete balance as nature intended. The pure natural salt is then specially enhanced for aquarium use by elevating specific elements that over time become depleted, such as calcium and magnesium which are used by corals and coralline algae for growth.
The final formulation for H2OceanPRO+ salt was developed by D-D following many months of testing and evaluation. The salt is designed to dissolve quickly and easily and to have a specific chemistry which in our opinion is the optimum formulation to maintain a healthy reef and allow regular water changes whilst maintaining a natural balance. Calcium and Magnesium levels are boosted to replace that used up through coral growth within the aquarium whereas chloride levels are slightly lowered to allow post additions of calcium and magnesium chloride with a minimized affect on the chloride balance.
PRO PLUS FORMULA WITH BOOSTED MAGNESIUM
Many salts concentrate on enhancing calcium levels and often ignore magnesium levels. Maintenance of the correct magnesium concentration is equally important in a reef aquarium and will make it much easier to maintain stable calcium, pH and alkalinity.
Parameters when mixed to an S.G:
of 1.025 @ 25ŚC = 35.5 ppt
|pH||8.3||8.2 - 8.4|
|dKH||9.3||8.7 - 9.8|
|Calcium (Ca2+)||440||430 - 460||mg/l|
|Magnesium (Mg2+)||1340||1300 - 1380||mg/l|
|Cloride (Cl-)||19550||19960 - 20130||mg/l|
The volume of salt water that can be made from a single bucket of salt will depend on the final SG that the salt solution is mixed to.
For a reef aquarium we suggest mixing to an S.G: of 1.025 @ 25ŚC = 35.5 ppt by using the salt to water ratio given below.
Using a clean container:
~Add 1 Kg of H2Ocean+ to 25 litres of water ( 1 Lb to 3.0 U.S. Gallons )
~Mix well until all of the salt is dissolved and the solution is clear.
~We recommend that you aerate for 24 hours and bring to temperature before use.
~Check the S.G. before addition to the aquarium.
~If required add more salt or water to obtain the correct S.G. reading.
~Remember that S.G. changes with temperature.
Recent Blog Posts
- CPR Nano & Mini Reactor Tumbler
- New JBJ LED Nano Cube Aquariums
- New Omega One Frozen Foods - made in USA
- Cobalt Aquatics Protein Skimmer Pumps
- Cobalt Aquatics Neo-Therm Heater (Plastic LED)
- Blue Life Clear FX PRO All-in-one Filtration Media...
- ReefBrite smaller LEDs, 8" to 24" had a nice ...
- Maggie Muffler - Overflow Standpipe Silencer
- Maxspect Razor 16K LED Fixture
- Hydor Koralia Evolution Pumps on SALE
6050 E. Hanna, STE 4
Indianapolis, IN 46203
ph. 317-895-9005 fx. 317-895-9395